kwik-ZIP® HDXT-103 spacers were installed to facilitate the sliplining of a MSCL Wastewater pressure main into a RC Jacking pipe running under a rail line for the Gosnells Main Pumping Station Wastewater Pressure Main Realignment project.
The simple and efficient installation process does not require any special tools nor is there any requirement to pre wrap pipe. kwik-ZIP® spacers have no metal parts and are made from kwikZIP’s engineered thermoplastic blend with high flexural strength, high temperature resistance, low co-efficient of friction, abrasion resistance and outstanding chemical resistance.
Integrated rubber grip pads under collars to prevent slippage. kwik-ZIP® spacers load sharing suspension system allows heavy loads to be shared across multiple runners reducing point loading and increasing the overall load capacity of the spacer.
“The MSCL pipes insertion is making good progress despite a challenging environment, with production efficiency notably enhanced by the simplicity of installation of the kwik-ZIP spacers.”
kwik-ZIP ®’s large range of spacers caters for a wide range of ID / OD combinations as well as providing flexibility to deal with project alterations.
All kwik-ZIP ® spacers are designed to meet the requirements of WSAA Product Spec # 324 (Casing Spacers).
“The MSCL pipes insertion is making good progress despite a challenging environment, with production efficiency notably enhanced by the simplicity of installation of the kwik-ZIP spacers.” Marie Piette, Project Manager, Rob Carr Pty Ltd.
For further information on kwik-ZIP ® products and to discuss your specific project requirements please contact us at sales@kwikzip.com
