Sanivar UK is exhibiting at No Dig Live to promote its pressure pipe lining technologies that offer long term sustainable pipe refurbishment options for multiple sectors including water, waste, industrial and gas.
Over the past 12 months the company’s project portfolio has grown and its has installed its SaniTube liner on both Rising Mains and Fire Mains to maintain the integrity of critical assets. The liner is available in diameters from 80 to 500 mm and is a winch-through liner that avoids the need to invert or cure, meaning that installations can be completed within two hours with minimum excavation or specialist resource.
The SaniLine liner is available in diameters from 80 to 1,200 mm and is a cured in place liner that has providence around the world on potable, waste and industrial networks.
Both liners are tested to 32 bar and are flexible with typical wall thicknesses of less than 3 mm, meaning that bends can often be navigated without excavation and that there is limited loss of bore.
Sanivar will also be showing its new range of service pipe liners, SaniFlex and NEOFIT covering diameters from 10 to 50 mm.
With water resources under increasing stress and the industry losing 2,459 million litres of potable water a day through leakage a radical reset is needed in network maintenance. Traditional repairs mean repeat visits and multiple excavations and contribute to the £70 billion cost of interventions and disruption caused by the utility sector every year.
With Reg31 Approval imminent for SaniTube and a Worldwide providence Sanivar is in a unique position to offer a proactive solution to leakage management.
